🌱Megaponics← All guides
🥑
Hydroponic grow guide · Vegetables

Avocado

🌤️ Mild-temperature crop🪣 Large Dutch bucket · Deep media / bato
TDS
800–900 ppm
EC
1.6–1.8
pH
5.8–6
Stages
10
Day temp
68–84°F

Stage by stage

Seedling: in the tray or plug

Young roots burn easily, so the feed starts weak and steps up in 3 small steps (EC 0.3 → 0.5 → 0.7). Move on when the plant looks like the next step, not by the calendar.

1
Step 1 of 3 · Seed leaves open
Seed leaves open flat. The seed itself gets plain water only.
🧪 Feed — weigh into a fresh tank
Target TDS 150 ppm · EC 0.3 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

2
Step 2 of 3 · First true leaves
First jagged true leaves are showing.
🧪 Feed — weigh into a fresh tank
Target TDS 250 ppm · EC 0.5 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

3
Step 3 of 3 · Ready to transplant
Roots fill the plug — ready to move into the system.
🧪 Feed — weigh into a fresh tank
Target TDS 350–400 ppm · EC 0.7–0.8 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

After transplant: first days in your system

Moving a seedling tears its fine roots, so strength drops back down and climbs again over 3 steps (EC 0.3 → 0.5 → 0.7).

4
Step 1 of 3 · Just transplanted
Just moved. Strength drops back so roots settle.
🧪 Feed — weigh into a fresh tank
Target TDS 150 ppm · EC 0.3 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

5
Step 2 of 3 · Roots into system
New white roots are growing into the system.
🧪 Feed — weigh into a fresh tank
Target TDS 250 ppm · EC 0.5 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

6
Step 3 of 3 · Before crop feed
Settled in. Flush with plain water, then start Vegetative.
🧪 Feed — weigh into a fresh tank
Target TDS 350–400 ppm · EC 0.7–0.8 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

Growing: full feed

Roots are settled. The plant now gets its full recipe for each stage.

7
Vegetative
Leafy growth.
🌡️ Target climate — this stage
Air · day
68–84°F20–29°C
Air · night
61–72°F16–22°C
Root zone
64–72°F18–22°C
Humidity
50–70%
VPD
0.8–1.2 kPa
DLI
14–20 mol
Light hours
12–14 h
Duration
180–1095 days

💡 Avocado is salt-sensitive — watch for leaf-tip burn and keep EC on the low side.

🧪 Feed — weigh into a fresh tank
Target TDS 800–900 ppm · EC 1.6–1.8 · pH 5.8–6.0

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8–6.0.

8
Flowering
Flowers opening.
🧪 Feed — weigh into a fresh tank
Target TDS 800–900 ppm · EC 1.6–1.8 · pH 5.8–6.0

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8–6.0.

9
Fruiting
Fruit setting and swelling.
🧪 Feed — weigh into a fresh tank
Target TDS 800–900 ppm · EC 1.6–1.8 · pH 5.8–6.0

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8–6.0.

10
Harvest
Picking — same recipe throughout.
🌡️ Target climate — this stage
Air · day
68–84°F20–29°C
Air · night
61–72°F16–22°C
Root zone
64–72°F18–22°C
Humidity
50–70%
VPD
0.8–1.2 kPa
DLI
16–22 mol
Light hours
12–14 h
Duration
180–365 days

💡 Realistically a leaf/ornamental crop indoors — fruiting needs a mature grafted tree and years.

🧪 Feed — weigh into a fresh tank
Target TDS 800–900 ppm · EC 1.6–1.8 · pH 5.8–6.0

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8–6.0.

Fix a deficiency

Iron
Interveinal chlorosis of new leaves — CERTAIN here, recipe supplies zero Fe.
Fix: Add Fe-EDTA (the recipe needs it; check pH ≤6.5)
Magnesium
Interveinal yellowing of older leaves — CERTAIN here, recipe supplies zero Mg.
Fix: Add Magnesium Sulfate (MgSO₄)
Sodium/Chloride (salt) stress
Leaf-tip and margin burn — avocado is highly salt-sensitive.
Fix: Keep EC low; flush with clean water
Micronutrients (B/Mn/Zn/Cu/Mo)
Trace symptoms (source Micro mix low at 0.1).
Fix: Increase Micro Nutrient Mix