🌱Megaponics← All guides
🫘
Hydroponic grow guide · Vegetables

Beans

🌤️ Mild-temperature crop🪣 Dutch bucket · Drip / media bed
TDS
800–900 ppm
EC
1.6–1.8
pH
5.8–6.2
Stages
10
Day temp
68–82°F

Stage by stage

Seedling: in the tray or plug

Young roots burn easily, so the feed starts weak and steps up in 3 small steps (EC 0.3 → 0.5 → 0.7). Move on when the plant looks like the next step, not by the calendar.

1
Step 1 of 3 · Seed leaves open
Seed leaves open flat. The seed itself gets plain water only.
🧪 Feed — weigh into a fresh tank
Target TDS 150 ppm · EC 0.3 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

2
Step 2 of 3 · First true leaves
First jagged true leaves are showing.
🧪 Feed — weigh into a fresh tank
Target TDS 250 ppm · EC 0.5 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

3
Step 3 of 3 · Ready to transplant
Roots fill the plug — ready to move into the system.
🧪 Feed — weigh into a fresh tank
Target TDS 350–400 ppm · EC 0.7–0.8 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

After transplant: first days in your system

Moving a seedling tears its fine roots, so strength drops back down and climbs again over 3 steps (EC 0.3 → 0.5 → 0.7).

4
Step 1 of 3 · Just transplanted
Just moved. Strength drops back so roots settle.
🧪 Feed — weigh into a fresh tank
Target TDS 150 ppm · EC 0.3 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

5
Step 2 of 3 · Roots into system
New white roots are growing into the system.
🧪 Feed — weigh into a fresh tank
Target TDS 250 ppm · EC 0.5 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

6
Step 3 of 3 · Before crop feed
Settled in. Flush with plain water, then start Vegetative.
🧪 Feed — weigh into a fresh tank
Target TDS 350–400 ppm · EC 0.7–0.8 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

Growing: full feed

Roots are settled. The plant now gets its full recipe for each stage.

7
Vegetative
Until the first flowers open.
🌡️ Target climate — this stage
Air · day
68–82°F20–28°C
Air · night
61–68°F16–20°C
Root zone
68–75°F20–24°C
Humidity
60–75%
VPD
0.7–1.1 kPa
DLI
14–20 mol
Light hours
14–16 h
Duration
14–25 days

💡 Don't over-feed N — excess gives lush vines and few pods.

🧪 Feed — weigh into a fresh tank
Target TDS 800–900 ppm · EC 1.6–1.8 · pH 5.8–6.2

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8–6.2.

8
Flowering
Flowers opening.
🌡️ Target climate — this stage
Air · day
68–81°F20–27°C
Air · night
61–68°F16–20°C
Root zone
68–75°F20–24°C
Humidity
55–70%
VPD
0.8–1.2 kPa
DLI
16–22 mol
Light hours
14–16 h
Duration
10–18 days

💡 Beans self-pollinate; heat >32°C causes flower/pod drop.

🧪 Feed — weigh into a fresh tank
Target TDS 800–900 ppm · EC 1.6–1.8 · pH 5.8–6.2

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8–6.2.

9
Fruiting
Pods filling.
🌡️ Target climate — this stage
Air · day
68–81°F20–27°C
Air · night
61–68°F16–20°C
Root zone
68–75°F20–24°C
Humidity
55–70%
VPD
0.8–1.2 kPa
DLI
16–22 mol
Light hours
14–16 h
Duration
14–30 days

💡 Pick young and often — mature pods on the plant slow new pod set.

🧪 Feed — weigh into a fresh tank
Target TDS 800–900 ppm · EC 1.6–1.8 · pH 5.8–6.2

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8–6.2.

10
Harvest
Picking — same recipe throughout.
🌡️ Target climate — this stage
Air · day
68–81°F20–27°C
Air · night
61–68°F16–20°C
Root zone
68–75°F20–24°C
Humidity
55–70%
VPD
0.8–1.2 kPa
DLI
16–22 mol
Light hours
14–16 h
Duration
14–40 days

💡 Pole beans crop for weeks if picked regularly; bush beans flush over ~2 weeks.

🧪 Feed — weigh into a fresh tank
Target TDS 800–900 ppm · EC 1.6–1.8 · pH 5.8–6.2

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8–6.2.

Fix a deficiency

Phosphorus
Dark/dull leaves, slow growth, poor flowering.
Fix: MKP (Mono Potassium Phosphate)
Potassium
Leaf-margin scorch; poor pod fill.
Fix: Potassium Nitrate
Iron
Interveinal chlorosis of new growth.
Fix: Fe-EDTA (check pH ≤6.5)
Micronutrients (B/Mn/Zn/Cu/Mo)
Trace symptoms (source Micro mix low at 0.1).
Fix: Increase Micro Nutrient Mix