🌱Megaponics← All guides
🫛
Hydroponic grow guide · Vegetables

Chickpea (green)

🌤️ Mild-temperature crop🪣 Dutch bucket · Drip / media bed
TDS
800–900 ppm
EC
1.6–1.8
pH
5.8–6.2
Stages
10
Day temp
64–82°F

Stage by stage

Seedling: in the tray or plug

Young roots burn easily, so the feed starts weak and steps up in 3 small steps (EC 0.3 → 0.5 → 0.7). Move on when the plant looks like the next step, not by the calendar.

1
Step 1 of 3 · Seed leaves open
Seed leaves open flat. The seed itself gets plain water only.
🧪 Feed — weigh into a fresh tank
Target TDS 150 ppm · EC 0.3 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

2
Step 2 of 3 · First true leaves
First jagged true leaves are showing.
🧪 Feed — weigh into a fresh tank
Target TDS 250 ppm · EC 0.5 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

3
Step 3 of 3 · Ready to transplant
Roots fill the plug — ready to move into the system.
🧪 Feed — weigh into a fresh tank
Target TDS 350–400 ppm · EC 0.7–0.8 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

After transplant: first days in your system

Moving a seedling tears its fine roots, so strength drops back down and climbs again over 3 steps (EC 0.3 → 0.5 → 0.7).

4
Step 1 of 3 · Just transplanted
Just moved. Strength drops back so roots settle.
🧪 Feed — weigh into a fresh tank
Target TDS 150 ppm · EC 0.3 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

5
Step 2 of 3 · Roots into system
New white roots are growing into the system.
🧪 Feed — weigh into a fresh tank
Target TDS 250 ppm · EC 0.5 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

6
Step 3 of 3 · Before crop feed
Settled in. Flush with plain water, then start Vegetative.
🧪 Feed — weigh into a fresh tank
Target TDS 350–400 ppm · EC 0.7–0.8 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

Growing: full feed

Roots are settled. The plant now gets its full recipe for each stage.

7
Vegetative
Until the first flowers open.
🌡️ Target climate — this stage
Air · day
64–82°F18–28°C
Air · night
57–68°F14–20°C
Root zone
64–72°F18–22°C
Humidity
50–65%
VPD
0.8–1.2 kPa
DLI
14–20 mol
Light hours
12–14 h
Duration
20–35 days

💡 Bushy habit; keep airflow strong and foliage dry.

🧪 Feed — weigh into a fresh tank
Target TDS 800–900 ppm · EC 1.6–1.8 · pH 5.8–6.2

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8–6.2.

8
Flowering
Flowers opening.
🌡️ Target climate — this stage
Air · day
64–82°F18–28°C
Air · night
57–68°F14–20°C
Root zone
64–72°F18–22°C
Humidity
50–65%
VPD
0.8–1.2 kPa
DLI
14–20 mol
Light hours
12–14 h
Duration
12–20 days

💡 Chickpea self-pollinates; moderate temps give the best pod set.

🧪 Feed — weigh into a fresh tank
Target TDS 800–900 ppm · EC 1.6–1.8 · pH 5.8–6.2

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8–6.2.

9
Fruiting
Pods filling.
🌡️ Target climate — this stage
Air · day
64–82°F18–28°C
Air · night
57–68°F14–20°C
Root zone
64–72°F18–22°C
Humidity
50–65%
VPD
0.8–1.2 kPa
DLI
16–22 mol
Light hours
12–14 h
Duration
15–30 days

💡 For 'green' chickpea, pick pods while seeds are tender and still green.

🧪 Feed — weigh into a fresh tank
Target TDS 800–900 ppm · EC 1.6–1.8 · pH 5.8–6.2

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8–6.2.

10
Harvest
Picking — same recipe throughout.
🌡️ Target climate — this stage
Air · day
64–82°F18–28°C
Air · night
57–68°F14–20°C
Root zone
64–72°F18–22°C
Humidity
50–65%
VPD
0.8–1.2 kPa
DLI
16–22 mol
Light hours
12–14 h
Duration
10–25 days

💡 Harvest green for fresh chickpeas; or let dry on the plant for dried chana.

🧪 Feed — weigh into a fresh tank
Target TDS 800–900 ppm · EC 1.6–1.8 · pH 5.8–6.2

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8–6.2.

Fix a deficiency

Potassium
Leaf-margin scorch, poor pods — LIKELY here (no K-nitrate in recipe).
Fix: Add Potassium Nitrate / Potassium Sulfate
Iron
Interveinal chlorosis of new growth — LIKELY (recipe Fe very low at 2.4).
Fix: Fe-EDTA (check pH ≤6.5)
Phosphorus
Dull/dark leaves, poor flowering.
Fix: MKP (Mono Potassium Phosphate)
Micronutrients (B/Mn/Zn/Cu/Mo)
Trace symptoms (source Micro mix very low at 0.04).
Fix: Increase Micro Nutrient Mix