🌱Megaponics← All guides
🌶️
Hydroponic grow guide · Vegetables

Chili Pepper

🔥 Warm-season crop — likes it warm🪣 Dutch bucket (bato) · Drip / rockwool slab
TDS
800–1250 ppm
EC
1.6–2.5
pH
5.8–6.2
Stages
10
Day temp
72–82°F

Stage by stage

Seedling: in the tray or plug

Young roots burn easily, so the feed starts weak and steps up in 3 small steps (EC 0.3 → 0.5 → 0.7). Move on when the plant looks like the next step, not by the calendar.

1
Step 1 of 3 · Seed leaves open
Seed leaves open flat. The seed itself gets plain water only.
🧪 Feed — weigh into a fresh tank
Target TDS 150 ppm · EC 0.3 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

2
Step 2 of 3 · First true leaves
First jagged true leaves are showing.
🧪 Feed — weigh into a fresh tank
Target TDS 250 ppm · EC 0.5 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

3
Step 3 of 3 · Ready to transplant
Roots fill the plug — ready to move into the system.
🧪 Feed — weigh into a fresh tank
Target TDS 350–400 ppm · EC 0.7–0.8 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

After transplant: first days in your system

Moving a seedling tears its fine roots, so strength drops back down and climbs again over 3 steps (EC 0.3 → 0.5 → 0.7).

4
Step 1 of 3 · Just transplanted
Just moved. Strength drops back so roots settle.
🧪 Feed — weigh into a fresh tank
Target TDS 150 ppm · EC 0.3 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

5
Step 2 of 3 · Roots into system
New white roots are growing into the system.
🧪 Feed — weigh into a fresh tank
Target TDS 250 ppm · EC 0.5 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

6
Step 3 of 3 · Before crop feed
Settled in. Flush with plain water, then start Vegetative.
🧪 Feed — weigh into a fresh tank
Target TDS 350–400 ppm · EC 0.7–0.8 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

Growing: full feed

Roots are settled. The plant now gets its full recipe for each stage.

7
Vegetative
Until the first flowers open.
🌡️ Target climate — this stage
Air · day
72–82°F22–28°C
Air · night
64–68°F18–20°C
Root zone
68–75°F20–24°C
Humidity
65–80%
VPD
0.8–1 kPa
DLI
14–22 mol
Light hours
12–16 h
Duration
21–40 days

💡 Chillies bush out — light pruning improves airflow and ripening.

🧪 Feed — weigh into a fresh tank
Target TDS 800–850 ppm · EC 1.6–1.7 · pH 5.8–6.2

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8–6.2.

8
Flowering
First flowers open until the first pods set.
🌡️ Target climate — this stage
Air · day
72–82°F22–28°C
Air · night
64–68°F18–20°C
Root zone
68–75°F20–24°C
Humidity
60–75%
VPD
1–1.3 kPa
DLI
18–26 mol
Light hours
12–16 h
Duration
14–28 days

💡 Warmth (but <32°C) gives the best set; extreme heat drops flowers.

🧪 Feed — weigh into a fresh tank
Target TDS 1150–1250 ppm · EC 2.3–2.5 · pH 5.8–6.2

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8–6.2.

9
Fruiting
Pods swelling.
🌡️ Target climate — this stage
Air · day
72–82°F22–28°C
Air · night
64–68°F18–20°C
Root zone
68–75°F20–24°C
Humidity
55–70%
VPD
1–1.4 kPa
DLI
20–30 mol
Light hours
12–16 h
Duration
30–60 days

💡 Mild water stress and brighter light raise capsaicin (heat) levels.

🧪 Feed — weigh into a fresh tank
Target TDS 1150–1250 ppm · EC 2.3–2.5 · pH 5.8–6.2

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8–6.2.

10
Harvest
Picking — same recipe as Fruiting.
🌡️ Target climate — this stage
Air · day
72–82°F22–28°C
Air · night
64–68°F18–20°C
Root zone
68–75°F20–24°C
Humidity
55–70%
VPD
1–1.4 kPa
DLI
20–30 mol
Light hours
12–16 h
Duration
30–90 days

💡 Pick green for milder heat or fully colored for maximum flavor and heat.

🧪 Feed — weigh into a fresh tank
Target TDS 1150–1250 ppm · EC 2.3–2.5 · pH 5.8–6.2

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8–6.2.

Fix a deficiency

Calcium
Blossom-end rot; soft sunken fruit tips.
Fix: Calcium Nitrate
Iron
Interveinal yellowing of young leaves (note: source recipe is very low in Fe).
Fix: Fe-EDTA (check pH ≤6.5)
Nitrogen
Pale, slow growth (note: source recipe is very low in K-nitrate).
Fix: Calcium Nitrate / Potassium Nitrate
Micronutrients (B/Mn/Zn/Cu/Mo)
Trace symptoms — distorted growing points.
Fix: Increase Micro Nutrient Mix