🌱Megaponics← All guides
🫘
Hydroponic grow guide · Vegetables

Cowpea

🔥 Warm-season crop — likes it warm🪣 Dutch bucket · Drip / media bed
TDS
800–900 ppm
EC
1.6–1.8
pH
5.8–6.2
Stages
10
Day temp
77–90°F

Stage by stage

Seedling: in the tray or plug

Young roots burn easily, so the feed starts weak and steps up in 3 small steps (EC 0.3 → 0.5 → 0.7). Move on when the plant looks like the next step, not by the calendar.

1
Step 1 of 3 · Seed leaves open
Seed leaves open flat. The seed itself gets plain water only.
🧪 Feed — weigh into a fresh tank
Target TDS 150 ppm · EC 0.3 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

2
Step 2 of 3 · First true leaves
First jagged true leaves are showing.
🧪 Feed — weigh into a fresh tank
Target TDS 250 ppm · EC 0.5 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

3
Step 3 of 3 · Ready to transplant
Roots fill the plug — ready to move into the system.
🧪 Feed — weigh into a fresh tank
Target TDS 350–400 ppm · EC 0.7–0.8 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

After transplant: first days in your system

Moving a seedling tears its fine roots, so strength drops back down and climbs again over 3 steps (EC 0.3 → 0.5 → 0.7).

4
Step 1 of 3 · Just transplanted
Just moved. Strength drops back so roots settle.
🧪 Feed — weigh into a fresh tank
Target TDS 150 ppm · EC 0.3 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

5
Step 2 of 3 · Roots into system
New white roots are growing into the system.
🧪 Feed — weigh into a fresh tank
Target TDS 250 ppm · EC 0.5 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

6
Step 3 of 3 · Before crop feed
Settled in. Flush with plain water, then start Vegetative.
🧪 Feed — weigh into a fresh tank
Target TDS 350–400 ppm · EC 0.7–0.8 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

Growing: full feed

Roots are settled. The plant now gets its full recipe for each stage.

7
Vegetative
Until the first flowers open.
🌡️ Target climate — this stage
Air · day
77–90°F25–32°C
Air · night
68–75°F20–24°C
Root zone
72–82°F22–28°C
Humidity
55–70%
VPD
0.7–1.1 kPa
DLI
14–20 mol
Light hours
12–14 h
Duration
12–22 days

💡 Bushy or vining types; provide support for climbing cultivars.

🧪 Feed — weigh into a fresh tank
Target TDS 800–900 ppm · EC 1.6–1.8 · pH 5.8–6.2

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8–6.2.

8
Flowering
Flowers opening.
🌡️ Target climate — this stage
Air · day
77–90°F25–32°C
Air · night
68–75°F20–24°C
Root zone
72–82°F22–28°C
Humidity
55–70%
VPD
0.8–1.2 kPa
DLI
16–22 mol
Light hours
12–14 h
Duration
10–18 days

💡 Cowpea self-pollinates and sets pods even in heat that stops common beans.

🧪 Feed — weigh into a fresh tank
Target TDS 800–900 ppm · EC 1.6–1.8 · pH 5.8–6.2

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8–6.2.

9
Fruiting
Pods filling.
🌡️ Target climate — this stage
Air · day
77–90°F25–32°C
Air · night
68–75°F20–24°C
Root zone
72–82°F22–28°C
Humidity
55–70%
VPD
0.8–1.2 kPa
DLI
16–22 mol
Light hours
12–14 h
Duration
12–25 days

💡 Harvest as green snap pods, or let dry on the plant for black-eyed peas.

🧪 Feed — weigh into a fresh tank
Target TDS 800–900 ppm · EC 1.6–1.8 · pH 5.8–6.2

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8–6.2.

10
Harvest
Picking — same recipe throughout.
🌡️ Target climate — this stage
Air · day
77–90°F25–32°C
Air · night
68–75°F20–24°C
Root zone
72–82°F22–28°C
Humidity
55–70%
VPD
0.8–1.2 kPa
DLI
16–22 mol
Light hours
12–14 h
Duration
14–40 days

💡 Pick young pods often for fresh use; leave to dry for storage peas.

🧪 Feed — weigh into a fresh tank
Target TDS 800–900 ppm · EC 1.6–1.8 · pH 5.8–6.2

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8–6.2.

Fix a deficiency

Magnesium
Interveinal yellowing of older leaves — LIKELY here, the recipe supplies zero Mg.
Fix: Add Magnesium Sulfate (MgSO₄)
Iron
Interveinal chlorosis of new growth (source recipe very low in Fe).
Fix: Fe-EDTA (check pH ≤6.5)
Phosphorus
Dark/dull leaves, poor flowering.
Fix: MKP (Mono Potassium Phosphate)
Micronutrients (B/Mn/Zn/Cu/Mo)
Trace symptoms (source Micro mix very low at 0.05).
Fix: Increase Micro Nutrient Mix