🌱Megaponics← All guides
🌸
Hydroponic grow guide · Flowers

Dianthus (garden pinks / sweet william)

❄️ Cool-season crop — likes it cool🪣 Ebb & flow (pots) · Drip to coco/perlite
TDS
850–950 ppm
EC
1.7–1.9
pH
5.5–6
Stages
8
Day temp
60–65°F

Stage by stage

Seedling: in the tray or plug

Young roots burn easily, so the feed starts weak and steps up in 3 small steps (EC 0.3 → 0.5 → 0.7). Move on when the plant looks like the next step, not by the calendar.

1
Step 1 of 3 · Seed leaves open
Seed leaves open flat. The seed itself gets plain water only.
🧪 Feed — weigh into a fresh tank
Target TDS 150 ppm · EC 0.3 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

2
Step 2 of 3 · First true leaves
First jagged true leaves are showing.
🧪 Feed — weigh into a fresh tank
Target TDS 250 ppm · EC 0.5 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

3
Step 3 of 3 · Ready to transplant
Roots fill the plug — ready to move into the system.
🧪 Feed — weigh into a fresh tank
Target TDS 350–400 ppm · EC 0.7–0.8 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

After transplant: first days in your system

Moving a seedling tears its fine roots, so strength drops back down and climbs again over 3 steps (EC 0.3 → 0.5 → 0.7).

4
Step 1 of 3 · Just transplanted
Just moved. Strength drops back so roots settle.
🧪 Feed — weigh into a fresh tank
Target TDS 150 ppm · EC 0.3 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

5
Step 2 of 3 · Roots into system
New white roots are growing into the system.
🧪 Feed — weigh into a fresh tank
Target TDS 250 ppm · EC 0.5 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

6
Step 3 of 3 · Before crop feed
Settled in. Flush with plain water, then start Vegetative.
🧪 Feed — weigh into a fresh tank
Target TDS 350–400 ppm · EC 0.7–0.8 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

Growing: full feed

Roots are settled. The plant now gets its full recipe for each stage.

7
Vegetative
Young plants building leaves and roots.
🌡️ Target climate — this stage
Air · day
60–65°F15.5–18.5°C
Air · night
60–65°F15.5–18.5°C
Duration
28 days

💡 Most cultivars need 6–9 weeks of cold (vernalization) before they flower reliably.

🧪 Feed — weigh into a fresh tank
Target TDS 850–950 ppm · EC 1.7–1.9 · pH 5.5–6.0

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.5–6.0.

8
Flowering
Buds showing through cutting — same recipe.
🌡️ Target climate — this stage
Air · day
65–65°F18.5–18.5°C
Air · night
55–55°F13–13°C
DLI
10 mol
Duration
40–70 days

💡 Facultative long-day — long days speed bloom but aren't required. Cooler = more buds, slower.

🧪 Feed — weigh into a fresh tank
Target TDS 850–950 ppm · EC 1.7–1.9 · pH 5.5–6.0

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.5–6.0.

Fix a deficiency

Nitrogen
Pale older leaves, weak shoot growth.
Fix: Calcium Nitrate / Potassium Nitrate
Potassium
Scorched leaf margins on older leaves; weak stems, poor flower quality.
Fix: Potassium Sulfate / Potassium Nitrate
Calcium
Dieback of shoot tips and young leaves; weak flower stems.
Fix: Calcium Nitrate
Magnesium
Interveinal yellowing of older leaves.
Fix: Magnesium Sulfate
Iron
Interveinal chlorosis of new leaves; common above pH 6.5.
Fix: Fe-EDTA (check pH ≤6.5)
Micronutrients (B/Mn/Zn/Cu/Mo)
Small, distorted or mottled new leaves.
Fix: Increase Micro Nutrient Mix