🌱Megaponics← All guides
🎃
Hydroponic grow guide · Vegetables

Squash

🔥 Warm-season crop — likes it warm🪣 Dutch bucket (bato) · Drip / rockwool slab
TDS
950–1050 ppm
EC
1.9–2.1
pH
5.5–6
Stages
10
Day temp
70–82°F

Stage by stage

Seedling: in the tray or plug

Young roots burn easily, so the feed starts weak and steps up in 3 small steps (EC 0.3 → 0.5 → 0.7). Move on when the plant looks like the next step, not by the calendar.

1
Step 1 of 3 · Seed leaves open
Seed leaves open flat. The seed itself gets plain water only.
🧪 Feed — weigh into a fresh tank
Target TDS 150 ppm · EC 0.3 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

2
Step 2 of 3 · First true leaves
First jagged true leaves are showing.
🧪 Feed — weigh into a fresh tank
Target TDS 250 ppm · EC 0.5 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

3
Step 3 of 3 · Ready to transplant
Roots fill the plug — ready to move into the system.
🧪 Feed — weigh into a fresh tank
Target TDS 350–400 ppm · EC 0.7–0.8 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

After transplant: first days in your system

Moving a seedling tears its fine roots, so strength drops back down and climbs again over 3 steps (EC 0.3 → 0.5 → 0.7).

4
Step 1 of 3 · Just transplanted
Just moved. Strength drops back so roots settle.
🧪 Feed — weigh into a fresh tank
Target TDS 150 ppm · EC 0.3 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

5
Step 2 of 3 · Roots into system
New white roots are growing into the system.
🧪 Feed — weigh into a fresh tank
Target TDS 250 ppm · EC 0.5 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

6
Step 3 of 3 · Before crop feed
Settled in. Flush with plain water, then start Vegetative.
🧪 Feed — weigh into a fresh tank
Target TDS 350–400 ppm · EC 0.7–0.8 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

Growing: full feed

Roots are settled. The plant now gets its full recipe for each stage.

7
Vegetative
Until the first flowers open.
🌡️ Target climate — this stage
Air · day
70–81°F21–27°C
Air · night
61–68°F16–20°C
Root zone
68–75°F20–24°C
Humidity
65–80%
VPD
0.8–1 kPa
DLI
16–24 mol
Light hours
14–16 h
Duration
15–25 days

💡 Bush and vining types both feed heavily on N and K (note high KNO₃ here).

🧪 Feed — weigh into a fresh tank
Target TDS 950–1050 ppm · EC 1.9–2.1 · pH 5.5–6.0

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.5–6.0.

8
Flowering
Flowers opening.
🌡️ Target climate — this stage
Air · day
70–81°F21–27°C
Air · night
64–68°F18–20°C
Root zone
68–75°F20–24°C
Humidity
60–75%
VPD
0.9–1.2 kPa
DLI
18–26 mol
Light hours
14–16 h
Duration
10–20 days

💡 Separate male/female flowers — hand-pollinate indoors; remove some males to balance.

🧪 Feed — weigh into a fresh tank
Target TDS 950–1050 ppm · EC 1.9–2.1 · pH 5.5–6.0

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.5–6.0.

9
Fruiting
Fruit filling.
🌡️ Target climate — this stage
Air · day
70–82°F21–28°C
Air · night
64–68°F18–20°C
Root zone
68–75°F20–24°C
Humidity
55–70%
VPD
1–1.4 kPa
DLI
20–30 mol
Light hours
14–16 h
Duration
20–45 days

💡 Summer squash fruits fast — harvest young and often; powdery mildew is the main threat.

🧪 Feed — weigh into a fresh tank
Target TDS 950–1050 ppm · EC 1.9–2.1 · pH 5.5–6.0

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.5–6.0.

10
Harvest
Picking — same recipe throughout.
🌡️ Target climate — this stage
Air · day
70–82°F21–28°C
Air · night
64–68°F18–20°C
Root zone
68–75°F20–24°C
Humidity
55–70%
VPD
1–1.4 kPa
DLI
20–30 mol
Light hours
14–16 h
Duration
20–60 days

💡 Keep picking — leaving mature fruit on the vine shuts down new set.

🧪 Feed — weigh into a fresh tank
Target TDS 950–1050 ppm · EC 1.9–2.1 · pH 5.5–6.0

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.5–6.0.

Fix a deficiency

Iron
Interveinal chlorosis of new growth (source recipe is very low in Fe).
Fix: Fe-EDTA (check pH ≤6.5)
Calcium
Blossom-end rot / poor fruit tips.
Fix: Calcium Nitrate
Magnesium
Interveinal yellowing of older leaves.
Fix: Magnesium Sulfate
Micronutrients (B/Mn/Zn/Cu/Mo)
Trace symptoms (note: source Micro mix is very low at 0.1).
Fix: Increase Micro Nutrient Mix