🌱Megaponics← All guides
🌼
Hydroponic grow guide · Flowers

Wallflower

TDS
900–1000 ppm
EC
1.8–2
pH
5.8–6.2
Stages
8

Stage by stage

Seedling: in the tray or plug

Young roots burn easily, so the feed starts weak and steps up in 3 small steps (EC 0.3 → 0.5 → 0.7). Move on when the plant looks like the next step, not by the calendar.

1
Step 1 of 3 · Seed leaves open
Seed leaves open flat. The seed itself gets plain water only.
🧪 Feed — weigh into a fresh tank
Target TDS 150 ppm · EC 0.3 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

2
Step 2 of 3 · First true leaves
First jagged true leaves are showing.
🧪 Feed — weigh into a fresh tank
Target TDS 250 ppm · EC 0.5 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

3
Step 3 of 3 · Ready to transplant
Roots fill the plug — ready to move into the system.
🧪 Feed — weigh into a fresh tank
Target TDS 350–400 ppm · EC 0.7–0.8 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

After transplant: first days in your system

Moving a seedling tears its fine roots, so strength drops back down and climbs again over 3 steps (EC 0.3 → 0.5 → 0.7).

4
Step 1 of 3 · Just transplanted
Just moved. Strength drops back so roots settle.
🧪 Feed — weigh into a fresh tank
Target TDS 150 ppm · EC 0.3 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

5
Step 2 of 3 · Roots into system
New white roots are growing into the system.
🧪 Feed — weigh into a fresh tank
Target TDS 250 ppm · EC 0.5 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

6
Step 3 of 3 · Before crop feed
Settled in. Flush with plain water, then start Vegetative.
🧪 Feed — weigh into a fresh tank
Target TDS 350–400 ppm · EC 0.7–0.8 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

Growing: full feed

Roots are settled. The plant now gets its full recipe for each stage.

7
Vegetative
Leafy growth.
🧪 Feed — weigh into a fresh tank
Target TDS 900–1000 ppm · EC 1.8–2.0 · pH 5.8–6.2

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8–6.2.

8
Flowering
Buds and blooms — same recipe.
🧪 Feed — weigh into a fresh tank
Target TDS 900–1000 ppm · EC 1.8–2.0 · pH 5.8–6.2

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8–6.2.