🌱Megaponics← All guides
🍉
Hydroponic grow guide · Vegetables

Watermelon

🔥 Warm-season crop — likes it warm🪣 Dutch bucket (bato) · Drip / rockwool slab
TDS
750–1100 ppm
EC
1.5–2.2
pH
5.8–6.2
Stages
10
Day temp
79–90°F

Stage by stage

Seedling: in the tray or plug

Young roots burn easily, so the feed starts weak and steps up in 3 small steps (EC 0.3 → 0.5 → 0.7). Move on when the plant looks like the next step, not by the calendar.

1
Step 1 of 3 · Seed leaves open
Seed leaves open flat. The seed itself gets plain water only.
🧪 Feed — weigh into a fresh tank
Target TDS 150 ppm · EC 0.3 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

2
Step 2 of 3 · First true leaves
First jagged true leaves are showing.
🧪 Feed — weigh into a fresh tank
Target TDS 250 ppm · EC 0.5 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

3
Step 3 of 3 · Ready to transplant
Roots fill the plug — ready to move into the system.
🧪 Feed — weigh into a fresh tank
Target TDS 350–400 ppm · EC 0.7–0.8 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

After transplant: first days in your system

Moving a seedling tears its fine roots, so strength drops back down and climbs again over 3 steps (EC 0.3 → 0.5 → 0.7).

4
Step 1 of 3 · Just transplanted
Just moved. Strength drops back so roots settle.
🧪 Feed — weigh into a fresh tank
Target TDS 150 ppm · EC 0.3 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

5
Step 2 of 3 · Roots into system
New white roots are growing into the system.
🧪 Feed — weigh into a fresh tank
Target TDS 250 ppm · EC 0.5 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

6
Step 3 of 3 · Before crop feed
Settled in. Flush with plain water, then start Vegetative.
🧪 Feed — weigh into a fresh tank
Target TDS 350–400 ppm · EC 0.7–0.8 · pH 5.8

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8.

Growing: full feed

Roots are settled. The plant now gets its full recipe for each stage.

7
Vegetative
Until the first female flowers open.
🌡️ Target climate — this stage
Air · day
79–90°F26–32°C
Air · night
68–73°F20–23°C
Root zone
72–79°F22–26°C
Humidity
65–80%
VPD
0.8–1 kPa
DLI
16–24 mol
Light hours
14–16 h
Duration
20–25 days

💡 Source Fe very low (10) — watch chlorosis on this fast, large vine.

🧪 Feed — weigh into a fresh tank
Target TDS 750–850 ppm · EC 1.5–1.7 · pH 5.8–6.2

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8–6.2.

8
Flowering
Female flowers opening and setting.
🌡️ Target climate — this stage
Air · day
79–90°F26–32°C
Air · night
68–73°F20–23°C
Root zone
72–79°F22–26°C
Humidity
60–75%
VPD
0.9–1.2 kPa
DLI
20–28 mol
Light hours
14–16 h
Duration
20–25 days

💡 Separate male/female flowers — hand-pollinate indoors for reliable set.

🧪 Feed — weigh into a fresh tank
Target TDS 1000–1100 ppm · EC 2.0–2.2 · pH 5.8–6.2

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8–6.2.

9
Fruiting
Fruit swelling.
🌡️ Target climate — this stage
Air · day
79–90°F26–32°C
Air · night
68–73°F20–23°C
Root zone
72–79°F22–26°C
Humidity
55–70%
VPD
1–1.4 kPa
DLI
22–30 mol
Light hours
14–16 h
Duration
25–45 days

💡 Big Ca jump in this stage (1000) supports rapid fruit fill — support fruit weight.

🧪 Feed — weigh into a fresh tank
Target TDS 1000–1100 ppm · EC 2.0–2.2 · pH 5.8–6.2

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8–6.2.

10
Harvest
Ripening and picking — same recipe as Fruiting.
🌡️ Target climate — this stage
Air · day
79–90°F26–32°C
Air · night
68–73°F20–23°C
Root zone
72–79°F22–26°C
Humidity
55–70%
VPD
1–1.4 kPa
DLI
22–30 mol
Light hours
14–16 h
Duration
10–25 days

💡 Harvest by tendril browning + dull thump — watermelon won't sweeten after picking.

🧪 Feed — weigh into a fresh tank
Target TDS 1000–1100 ppm · EC 2.0–2.2 · pH 5.8–6.2

Mix in the calculator's order: Part A (Calcium Nitrate, Potassium Nitrate, Fe-EDTA), then Part B (MKP, Potassium Sulfate, Magnesium Sulfate), then the micro mix last. Dissolve each salt fully before the next, and never mix A and B together undiluted. Check TDS, then set pH to 5.8–6.2.

Fix a deficiency

Iron
Interveinal chlorosis of new growth (source recipe is low in Fe).
Fix: Fe-EDTA (check pH ≤6.5)
Calcium
Blossom-end rot of fruit under erratic watering.
Fix: Calcium Nitrate
Magnesium
Interveinal yellowing of older leaves.
Fix: Magnesium Sulfate
Micronutrients (B/Mn/Zn/Cu/Mo)
Trace symptoms — poor set, distorted growth.
Fix: Increase Micro Nutrient Mix